5PZS450霍克UKHAWKER蓄电池48V450AH电动堆高车电源
蓄电池的安装
蓄电池一般采用串联方式使用，即一只蓄电池的正极与另一只蓄电池的负极相连，将所有蓄电池连在一起，Zui后余下正负接线端子与电动车对应接线相连，电动车的电机、控制器、仪表等是蓄电池的用电负载。
电动车一般都有电池盒，从安装位置分有斜杠式，后插式和底盘式安装，其结构形状可谓五花八门。每家电动车厂都各有特色。如图电池盒一般用工程塑料制成，其强度较好，重量较轻，安装方便。电池盒一般由底槽、上盖、蓄电池接触点及充电插座、电车锁等组成。底槽与上盖扣紧，并用自攻螺丝或螺栓紧固。电池盒是按蓄电池型号规格进行设计的，在整车设计时应考虑其良好的散热性能。
The plates of lead-acidbatteries can be divided into four categories based on theirstructure and active material formation methods: coated plates,tubular plates, formed plates, and semi formed plates. The coatedelectrode plate is composed of a grid and active substances. Thefunction of the grid is to support the active substance and conductcurrent, making the current evenly distributed. The material of thegrid is generally lead antimony alloy, and maintenance freebatteries use lead calcium alloy. The main component of thepositive electrode active substance is lead dioxide, and the maincomponent of the negative electrode active substance is velvetylead.
Partition board
The battery separator is madeof materials such as microporous rubber and fiberglass, and itsmain function is to:
Prevent short circuits betweenpositive and negative plates; Enable the smooth passage of positiveand negative ions in the electrolyte. Prevent the detachment ofactive substances from the positive and negative plates, andprevent damage to the plates due to vibration