应用
*适用于较重负荷的应用
*几乎无限的耐油性，也适用于生物油
室内和室外应用，抗紫外线
*尤其适用于无支撑行驶和滑行距离达1,312ft(400m)及以上*储存和取回装置高架仓库，加工单元/机床，快速处理，无尘室，半导体插入，船到岸，室外起重机，低温应用
电缆结构:
导体：特别耐弯曲的绞线，由裸铜线组成
遵循DIN EN 60228)
核心绝缘：机械上优质的TPE混合物
核心结构：芯数<12:以短节距缠绕在一层中的芯。
芯数≥12:将芯子捆成一束，将其缠绕在高抗拉强度的中心元件上，所有芯体均具有优化的短节距长度和方向。特别是低扭力的结构。
核心识别：小于0.75mm?的
芯:符合DIN47100的颜色代码。20.75mm2的芯:黑色带白色数字的芯，一个绿黄色芯CF10.03.05.INI:棕色，蓝色，黑色，白色，绿黄色
护套材料：绝缘:TPE
外套:TPE
整体屏蔽：铝/聚酯胶带和镀锡
铜线制成的极耐弯曲的编织物。
覆盖范围约 线性约70%690%光学
标称电压
测试电压
300/500 V(遭循DINVDE0298-3)
2000V(循DIN EN 50395
较小 弯曲半径弹性较小4 xd
固定较小3 xd
温度范围
柔性-50°C至+100°C(循DINEN60811-504)
固定-55°C至+100°C(符合DIN EN50305)
较多
较大速度
100 m/s2
无支撑的10 m/s
滑行6 m/s
Apply
* Suitable for heavy loadapplications
* Almost unlimited oilresistance, also suitable for bio-oils
Uv resistant for indoor andoutdoor applications
* Especially suitable forunsupported travel and coasting distances up to 1,312ft(400 m) andabove * Storage and retrieval units Elevated warehouses, processingunits/machine tools, fast handling, clean rooms, semiconductorinsertion, ship-to-shore, outdoor cranes, low temperatureapplications
Cable structure:
Conductor: Twisted wire withspecial resistance to bending, consisting of bare copperwire
According to DIN EN60228)
Core insulation: Mechanicallysuperior TPE mixture
Core structure: Cores <12:cores wrapped in a layer with a short pitch.
Number of cores ≥12: Bundle thecores into a bundle and wrap them around a high tensile strengthcentral element, all with optimized short pitch length andorientation. Especially low-torque structures.
Core recognition: Less than0.75mm? the
Core: according to the colorcode of DIN47100. 20.75mm2 core: Black core with white numbers, onegreen-yellow core CF10.03.05.INI: brown, blue, black, white,green-yellow
Sheath material: Insulation:TPE
Coat :TPE
Overall shielding:aluminum/polyester tape and tin plating
A braided fabric made of copperwire that is extremely resistant to bending.
Coverage is about linear about70%690% optical
Nominal voltage
Test voltage
300/500 V(according to DINVDE0298-3)
2000V(according to DIN EN50395
Smaller bending radius lesselasticity 4 xd
Fixed smaller 3 xd
Temperature range
Flexibility -50°C to+100°C(according to DIN EN60811-504)
Fixed from -55°C to+100°C(according to DIN EN 50305)
more
Greater speed
100 m/s2
Unsupported 10 m/s
Slide 6 m/s
