西门子模块总代理商|汕尾PLC模块代理商
SINAMICS DCC (STARTER) |
概述
SIMATIC MICRO-DRIVE drive system, PDC Drives, PDC100, PDC100F,PDC600, PDC600F, PDC1000 V1 variants
Drive controller modules for ET200SP
SIMATIC MICRO-DRIVE F-TM StepDrive ST, ServoDrive HF undServoDrive ST
西门子模块总代理商|汕尾PLC模块代理商
SINAMICS DCC (STARTER) |
The requirements for motion control tasks in automation are everincreasing and are becoming more and more multi-faceted andcomplex. Digitalization is bringing about new solution approaches,regardless of the industry or application.
Fit for digitalization with SIMATIC MICRO-DRIVEThe SIMATIC MICRO-DRIVE drive system allows you to make a perfectentry into the world of digitalization. Thanks to TotallyIntegrated Automation (TIA), converters and motors are completelyintegrated into the Siemens automation environment and can beeasily selected using the TIA Selection Tool and configured usingthe TIA Portal. A wide range of tools for the complete machinebuilding cycle ensures efficient engineering and fastcommissioning. Machine data is made available through MindSphere,the cloud-based, open IoT operating system from Siemens.
Well designed, flexible and fit for the futureSIMATIC MICRO-DRIVE is an extremely versatile, seamless andsafety-oriented drive system that covers a wide range ofapplications in the protective extra-low voltage range.
It
西门子模块总代理商|汕尾PLC模块代理商
SINAMICS DCC (STARTER) |
comprises the SIMATIC MICRO-DRIVE PDC Drives and TM Drives, as wellas versatile EC motors and plug-in cables. The rightcontrollers from the SIMATIC portfolio from Siemens optimally roundout the motion control functions of this future-proofsolution.
The F-TM StepDrive ST completes the portfolio within the range ofcontrolling stepper motors.
In combination with EC Motors and stepper motors up to 280 Wthe F-TM ServoDrive HF allows positioning and speed control in veryconfined spaces. The triple overload capability and the support ofBiSS-C Multiturn encoders extend the scope of applications.
Can be combined with motors and plug-in cables from selectedSiemens Product PartnersTo ensure that all of the requirements in drive technology are metin the best way possible, the SIMATIC MICRO-DRIVE drive system iscompatible with individual and supplementary motors (Dunkermotoren,ebm-papst) and plug-in cables (Harting, KnorrTec) fromwell-established Siemens Product Partners. This allows an optimalcombination of suitable products from proven product partners forthe individual application.
SINAMICS DCC (STARTER) |
SIMATIC MICRO-DRIVE is the ideal drive in numerous applicationareas. The system stands out when executing positioning tasks inproduction and manufacturing as well as in innovative applicationdomains. Examples include drives for storage and retrieval machineshuttles and high bay racking systems, driverless transport systemsas well as medical applications such as safely and reliably movingMRT examination tables and automatically aligning ceiling-mounteddevices in radiographic applications.
For all applicationsMoving
Energy-efficient and rugged solutions for basic conveyor technologywith roller or chain conveyors, for hoisting gear andelevators – as well as for storage and retrievalmachines – and always with Safety Integrated on board.
Processing
Ideal solution for continuous processes with simple speed andtorque accuracy, for example with extruders, centrifuges, agitatorsan all types of production machines – motion control,isochronous communication (only for SIMATIC MICRO-DRIVE PDC Drives)and Safety Integrated.
Positioning
SINAMICS DCC (STARTER) |
SIMATIC MICRO-DRIVE is the solution for24/48 V DC applications: The positioning ofindividual axes and even the coordinated interpolation of severalaxes – such as in complex robotic applications – can be achievedeasily.
Simple commissioning of SIMATIC MICRO-DRIVE PDC Drives through OneButton Tuning and TIA Portal (V15 SP1 or higher)Commissioning and engineering are possible with TIA Portal (V15 SP1or higher). The tool for configuration, commissioning anddiagnostics has been optimized with regard to the consistentutilization of the TIA Portal advantages – one shared workenvironment for PLC, HMI and drives.
For more information, see the Engineering tools section.
Safety IntegratedThe integrated safety functions provide highly effective,application-oriented protection for personnel and machinery (termsas defined in IEC 61800-5-2).
The following Safety Integrated functions are included (not all ofthe functions are included in all of the drive controllers):
Safe Torque Off (STO) 1)
西门子模块总代理商|汕尾PLC模块代理商
SINAMICS DCC (STARTER)
Safe Stop 1 (SS1, only for failsafe variants, e.g. PDC100F)
Safely-Limited Speed (SLS, only for failsafe variants, e.g.PDC100F)
New function: Safely-Limited Torque (SLT, only for failsafevariants)
Monitoring of motor current and torque during operation by means ofsafely-limited torqueSafe Speed Monitor (SSM, only for failsafe variants, e.g.PDC100F)
The Safety Integrated functions are fully integrated into the drivesystem (only for failsafe variants, e.g. PDC100F).
The Safety Integrated functions are implemented electronically andtherefore require no additional installation effort or space in thecontrol cabinet. Furthermore, the costs are considerably lower thanfor externally implemented monitoring functions.
The Safety Integrated functions can be easily put into operationvia the TIA Portal (V15 SP1 or higher) and activation through aSIMATIC controller via PROFIsafe.
1) Does not apply for PDC1000 V1
SINAMICS DCC (STARTER) |
Communication with the higher-level control takes place viaPROFINET. For optimal interaction between the controller and theSIMATIC MICRO-DRIVE drive system, SIMATIC S7-1200, SIMATIC S7-1500,SIMATIC S7-1500 T-CPU, SIMATIC ET 200SP Open Controller can beused as the control system.
The SIMATIC MICRO-DRIVE PDC Drives features an integratedPROFINET IRT communication interface with a communicationcycle of up to 1 ms for connecting to a control system.
Standardized protocols for linking to a higher-level control withRT and IRT are supported – the PROFIdrive profile for positioningmode and the PROFIsafe profile for safety-oriented communication.Functions such as Shared Device, ring redundancy, and PROFIenergyare also possible.
SINAMICS DCC (STARTER) |
All from a single source: Through the use of Motion Controlfunctionalities in the controller, the combination of converter andSIMATIC S7 automation system or a controller allows ideallyharmonized engineering. As a result, commissioning times areshortened.
Technology objects and Motion Control blocks of the higher-levelcontroller provide numerous possibilities of motion, such ascontinuous operation, positioning, synchronous operation,coordinated motion of multiple axes, cam disks, orinterpolation.
Siemens offers tested SIMATIC PLC/HMI application examples forconnection of the drive system to a SIMATIC control system:
www.siemens.com/sinamics-applications
SINAMICS DCC (STARTER) |
西门子模块总代理商|汕尾PLC模块代理商
SINAMICS DCC (STARTER) |
Further information on the SIMATIC S7-1500, SIMATIC S7-1500 T-CPUcontrollers and SIMATIC ET 200SP Open Controller is availablein the ST 70 Catalog and on the internet at
www.siemens.com/simatic-s7-1500
Example: communication via PROFINET with SIMATIC MICRO-DRIVE PDCDrives
Connection example: SIMATIC MICRO-DRIVE drive system, PDC Drives,PDC100 variant
Can be used worldwideIn addition to the usu
SINAMICS DCC (STARTER) |
al approvals, the UL approval for the North American market hasalso been requested for the SIMATIC MICRO-DRIVE drive system. Thus,the SIMATIC MICRO-DRIVE drive system is available for worldwideuse.
Detailed information on the SIMATIC MICRO-DRIVE drive system,including the latest technical documentation (brochures, tutorials,dimensional drawings, certificates, equipment manuals and operatinginstructions), is available on the internet at:
www.siemens.com/micro-drive
and also via the TIA Selection Tool:
SINAMICS DCC (STARTER) |
SINAMICS DCC (STARTER) |