中兴ZXDU68 T601室内通信电源
1、电源说明
中兴ZXDU68 T601通信电源系统的整流模块采用无损伤热插拔技术，可在线不
断电直接操作。其输出和输入都有软启动单元，当模块插入系统时，不会引起系
统输出电压的扰动。更换模块时间小于1分钟。整流模块采用先进的数字化均流
技术，无需监控模块，整流模块间可以自动均流.
中兴ZXDU68 T601通信电源是中兴公司设计的新一代通信电源系统，整机效率
高达90％，大功率可达到34800W。XDU68 T601采用完全数字化设计，模块
安装、使用和维护非常简单
2、中兴ZXDU68 T601通信电源系统特点
室内型直流电源系统，额定直流输出电压为–53.5 V。
满配置12个ZXD2400整流器，系统大输出功率为34800 W。
采用三相交流输入，宽输入电压范围（相电压80 V ～ 300 V）。
蓄电池外置在ZXDU68 T601系统机柜外。ZXDU68 T601系统机柜内集交流配
电、直流配电、整流和监控于一体。
整流器及监控单元支持热插拔。
具有完善的监控管理功能
节能管理：支持自动节能、暂时非节能、非节能。
蓄电池管理：支持温度补偿、充电限电流、自动周期均充、自动周期测试。
下电管理：支持自动二次下电保护，支持手动下电控制。
信息管理：支持系统信息查询、告警信息查询、历史记录查询。
告警提示：支持声音告警、光告警、干接点告警和通讯告警。
支持RS232、RS485、干接点、IP等多种监控组网方式。
3、技术指标
适用环境
工作温度：-5 ℃ ~ +45 ℃，佳+15 ℃ ~ +25 ℃
存储温度：-40 ℃ ~ +70 ℃
相对湿度：10% ~ 90%（无冷凝），佳40% ~ 60%
大气压：70 kPa ~ 106 kPa
交流配电交流输入制式三相五线制（L1/L2/L3/N/PE）
额定交流输入电压相电压：220 V，线电压：380 V
交流输入电压范围可波动范围（相电压）：80 V ~ 300 V
<70 V时，欠压关机；
70 V~80 V时，欠压保护；
80 V~100 V时，单台整流器输出限流点为20A±2A；
100 V~176 V时，单台整流器输出限流点为31A±2A；
176 V~300 V时，单台整流器输出限流点为53A±1A；
300 V时，过压保护关机
交流输入频率范围：50/60 Hz
单相大输入电流：72 A
防雷级别C级交流防雷，防雷泄放电流≤ 40 kA
输入功率因数：≥ 0.99
Zte ZXDU68 T601 indoor communication power supply
1, the power supply
Zte ZXDU68 T601 communication power supply system of rectifiermodule with no damage hotplug technique, can not online
Power operation directly. The output and input unit has a softstart, when the module is inserted into the system, does notcause
System output voltage disturbance. Replace the module time isless than 1 minute. Rectifier module adopts advanced digitalflow
Technology, no monitoring module, rectifier modules canautomatically flow.
Zte ZXDU68 T601 communication power supply is zte design of anew generation of communication power supply system, the machineefficiency
As high as 90%, maximum power 34800 w. XDU68 T601 USES the fullydigital design, module
Installation, use and maintenance is very simple
2, zte ZXDU68 T601 communication power supply system
Indoor type dc power supply system, dc output rated voltage of53.5 V.
12 ZXD2400 rectifier with configuration, the system maximumoutput power is 34800 W.
Based on three-phase ac input, wide input voltage range (phasevoltage 80 V ~ 300 V).
External battery outside ZXDU68 T601 system cabinet. Communicatewith ZXDU68 T601 system inside the cabinet set
Electric, dc power distribution, rectifier and monitoring.
Support hot-swappable rectifier and monitoring unit.
Has the perfect monitoring management function
Energy saving management: support automatic energy-saving,temporarily not energy-saving, permanent not energy-saving.
Battery management: support for temperature compensation, chargelimited current, automatic cycle are filling, automatic cycletest.
The electricity management: support automatic secondaryelectrical protection, under the support manual electriccontrol.
Information management: support system information query, thealarm information query, history inquiry.
Warning: support the sound alarm, light alarm, and the drycontacts alarm and communication alarm.
Support RS232, RS485, dry contact, IP monitoring network avariety of ways.
3, technical indicators
Apply to the environment
Working temperature: - 5 ℃ ~ + 45 ℃ and + 15 ℃ ~ + 25 ℃
Storage temperature: - 40 ℃ ~ + 70 ℃
Relative humidity: 10% ~ 90% (no condensation), best 40% ~60%
Atmosphere: 70 kPa to 106 kPa
Ac power distribution ac input formats three-phase five wire (L1/ L2 / L3 / N/PE)
Rated ac input voltage phase voltage: 220 V, line voltage: 380V
Ac input voltage range can range (phase voltage) : 80 V to 300V
< 70 V, under-voltage shutdown;
70 V to 80 V, under-voltage protection;
80 V to 100 V, single output rectifier current limit point of 20a, plus or minus 2 a.
100 V to 176 V, single output rectifier current limit point of31 a, plus or minus 2 a.
176 V to 300 V, single output rectifier current limit point for53 a, plus or minus 1 a.
300 V, the overvoltage
